Dascom 7010 Programmers Manual ZPL Instrukcja Użytkownika Pobierz pdf (Strona 9)

Accepted Values:-9999 to 9999

Initial Value at Power-up:0

Comments:

When entering positive values, it is not necessary to use the + sign, The value is assumed to be

positive unless preceded by a negative sign.

^PW

Print Width

Description:

The ^PW command allows you set the print width.

This command changes “Label Width”(operation panel).

Format: ^PWa

Parameters:

a = label width in dots

Default Values:

A value must be entered or the command is ignored

103.9mm(4.09) inches using 8 dot/mm printhead

Comments:

^FW

Field Orientation

Description:

The ^FW command sets the default orientation for all command fields that have an orientation

(rotation) parameter. Fields can be rotated 0,90,180,270 degrees clockwise by using this command.

The ^FW command only affects fields that follow it. Once you have issued a ~FW commands, the

setting is retained until you turn off the printer or send a new ^FW command to the printer.

Format: ^FWr

Parameters:

r = rotate field

Accepted Value:

N = normal

R = rotated 90 degrees

I = inverted 180 degrees

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 75 76

Brak uwag

Dascom 7010 Programmers Manual ZPL Instrukcja Użytkownika Strona 9